From e72416541656d9d3b09798c038ad753ef34b6724 Mon Sep 17 00:00:00 2001 From: Boris Honman Date: Sat, 24 Aug 2019 16:14:37 -0400 Subject: [PATCH] fix image formatting in readme --- README.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/README.md b/README.md index afe6424..272d7fc 100644 --- a/README.md +++ b/README.md @@ -32,10 +32,10 @@ The bootloader is also capable of programming an entirely new application to the 1. Download the latest release of the firmware update utility from [https://source.jojcorp.com/bia-microddr/bia_microddr_fw_flash_utility/releases](https://source.jojcorp.com/bia-microddr/bia_microddr_fw_flash_utility/releases). 2. Download the latest version of the application from [https://source.jojcorp.com/bia-microddr/bia_microddr_fw/releases](https://source.jojcorp.com/bia-microddr/bia_microddr_fw/releases). This will be a file with the extension ".hex". 3. Connect the device to be updated to the computer now if you have not already done so. **DO NOT CONNECT MORE THAN 1 BIA DEVICE WHILE UPDATING FIRMWARE!** -![](https://source.jojcorp.com/bia-microddr/bia_microddr_fw_flash_utility/raw/branch/master/guideimgs/guide1.JPG) + ![](https://source.jojcorp.com/bia-microddr/bia_microddr_fw_flash_utility/raw/branch/master/guideimgs/guide1.JPG) 4. Run the firmware update utility and it will notify you that it must put the device in firmware update mode. Click "OK" to continue. The device will very briefly disconnect from the PC and reconnect in firmware update mode. The utility should now display the device as "Connected". 5. Click the "Browse" button under "Step 2: Select App FW File" and open the ".hex" application firmware file you downloaded. -![](https://source.jojcorp.com/bia-microddr/bia_microddr_fw_flash_utility/raw/branch/master/guideimgs/guide2.jpg) + ![](https://source.jojcorp.com/bia-microddr/bia_microddr_fw_flash_utility/raw/branch/master/guideimgs/guide2.jpg) 6. Click the "FLASH FIRMWARE NOW" button. The utility will begin updating the application firmware on the device and will open a message dialog to notify you when the update is complete. This should not take more than a few seconds. -![](https://source.jojcorp.com/bia-microddr/bia_microddr_fw_flash_utility/raw/branch/master/guideimgs/guide3.JPG) + ![](https://source.jojcorp.com/bia-microddr/bia_microddr_fw_flash_utility/raw/branch/master/guideimgs/guide3.JPG) 7. Click "Yes" on the dialog to reset the device or disconnect and reconnect it to boot into the new application firmware. \ No newline at end of file